lirc (0.10.1-6.3) unstable; urgency=medium

  * Non-maintainer upload.
  * d/lirc.preinst: Normalize embedded ${DEB_HOST_MULTIARCH} value in
    /etc/lirc/lirc_options.conf to find unmodified configuration files on all
    architectures.
  * Recommend gir1.2-vte-2.91 instead of non-existant gir1.2-vte.
    (Closes: #983581)

 -- Andreas Beckmann <anbe@debian.org>  Thu, 18 Mar 2021 22:21:31 +0100

lirc (0.10.1-6.2) unstable; urgency=medium

  * Non-maintainer upload.
  * Revert "Revert "Do not install conffiles in a dummy location""
    (0.10.1-5.2).  (Closes: #932779, #851618)
  * d/lirc.maintscript: rm_conffile /etc/lirc/*.dist because they are most
    likely unmodified, don't mv_conffile them to =~ s/\.dist// to avoid
    clashes with existing and possibly modified configuration files.
  * d/lirc.preinst: Remove unmodified configuration files that are unknown to
    dpkg to avoid prompting when replacing them with conffiles.

 -- Andreas Beckmann <anbe@debian.org>  Thu, 14 May 2020 11:46:53 +0200

lirc (0.10.1-6.1) unstable; urgency=medium

  * Non-maintainer upload.
  * Fix time.clock usage. Closes: #949835.

 -- Matthias Klose <doko@debian.org>  Fri, 13 Mar 2020 08:55:53 +0100

lirc (0.10.1-6) unstable; urgency=medium

  * Team upload
  * debian/patches/lirc-gpio-ir-0.10.patch:
    - fix for kernel 4.19 (Closes: #931078, 930485).

 -- Gianfranco Costamagna <locutusofborg@debian.org>  Thu, 04 Jul 2019 16:43:06 +0200

lirc (0.10.1-5.2) unstable; urgency=medium

  * Non-maintainer upload.
  * Revert removal of liblircclient{0,-dev} (Closes: #925477)
  * Revert "Do not install conffiles in a dummy location" (Closes: #925066)

 -- Tobias Frost <tobi@debian.org>  Sat, 06 Apr 2019 15:12:52 +0200

lirc (0.10.1-5.1) unstable; urgency=medium

  * Non-maintainer upload

  * debian/rules
    + Remove rdfind-based dedup (Closes: #919843)
      Using dh_installdocs --link-docs was investigated, and rejected due to
      - limited benefits;
      - interactions between lirc-docs shipping files under /usr/share/doc/lirc,
        but liblirc0 being the obvious candidate due to dependencies.

    + Do not install conffiles in a dummy location
      dpkg will, by default, not overwrite users' conffiles,
      so shipping them in a different location is superfluous.

  * Removed liblircclient{0,-dev}
    They were obsolete transitional packages that predated the stretch release.

  * Rename debian/post{inst,rm} to lirc.post{inst,rm}
  * debian/lirc.{postinst,prerm}: Recompile and remove Python bytecode as needed
    Closes: #924158

  * debian/control: Fix relationships on liblirc{,client}-dev.
    This should be Breaks+Replaces, not Conflict+Replaces.
    Using the former should ensure that upgrading from stretch works smoothly.

  * debian/changelog: Fix spelling in v0.10.1-4

 -- Nicolas Braud-Santoni <nicoo@debian.org>  Tue, 12 Mar 2019 01:33:40 +0100

lirc (0.10.1-5) unstable; urgency=medium

  * Fix upstream #343, --connect parsing error.
  * Add systemd-notify call -> lircd won't start with invalid config files.
  * Move VCS repository (now separate from upstream).
  * Fix lintian command-with-path-in-maintainer-script warning.
  * Fix lintian warning for duplicate files; new rdfind(1) build dep.

 -- Alec Leamas <leamas.alec@gmail.com>  Tue, 01 Jan 2019 09:19:01 -0500

lirc (0.10.1-4) unstable; urgency=medium

  [ Alec Leamas ]
  * Don't use broken LOG_CONS syslog flag, closes: #872749.

  [ Pino Toscano ]
  * Fix build on !linux OS, restrict systemd only to linux OS. closes: #912400

  [ Gianfranco Costamagna ]
  * Team upload
  * Restrict postinst systemd calls only if systemd is installed

  [ Helmut Grohne ]
  * Remove multiarch-annotation fom liblirc-dev (Closes: #874246)

 -- Alec Leamas <leamas.alec@gmail.com>  Fri, 23 Nov 2018 23:41:01 -0500

lirc (0.10.1-3) unstable; urgency=medium

  * Remove links created in postinst, closes: #911548.
  * Add missing Recommends: systemd.
  * Fix insecure URIs in d/control vcs-git: and d/copyright Format:.
  * Add rudimentary upstream/metadata.

 -- Alec Leamas <leamas.alec@gmail.com>  Thu, 25 Oct 2018 13:05:49 -0400

lirc (0.10.1-2) unstable; urgency=medium

  * Team upload.
  * Update maintainer email address (Closes: #899981)

 -- Gianfranco Costamagna <locutusofborg@debian.org>  Mon, 15 Oct 2018 18:01:50 +0200

lirc (0.10.1-1) unstable; urgency=medium

  * New minor upstream release.
  * Add fix for lirc-setup(1) crash on startup.
  * Services besides lircd.socket disabled after install.
  * Bump standards-version to 4.2.1 without changes.
  * Drop 0001-build... patch now upstreamed.
  * Obsolete priority: extra => optional.

 -- Alec Leamas <leamas.alec@gmail.com>  Fri, 12 Oct 2018 16:51:50 -0400

lirc (0.10.0-2) unstable; urgency=medium

  * Fixed missing media/lirc.h, closes: #872074
  * Fixed VCS browser path
  * Fixed upstream bug #294 (VPATH build issues, in -1).
  * Fixed upstream bug #295  - lircmd non-existing socket writes, in -1.

 -- Alec Leamas <leamas.alec@gmail.com>  Sun, 13 Aug 2017 09:45:34 +0200

lirc (0.10.0-1) unstable; urgency=medium

  * New upstream release
  * Upload to unstable
  * Bump std-version to 4.0.1
  * Drop dh-autoreconf, useless with compat level 10

 -- Alec Leamas <leamas.alec@gmail.com>  Sat, 12 Aug 2017 06:34:57 +0200

lirc (0.10.0~rc3-1) experimental; urgency=medium

  * New upstream release.
  * kfreebsd build fixes.
  * Remove lingering /etc/init.d/lirc, closes: #865376.
  * Fix absolute path config files, closes: #860065 (rc1).
  * Suggest stopping lircd in devinput "No device available" message,
    closes: #860551 (rc1).

 -- Alec Leamas <leamas.alec@gmail.com>  Thu, 22 Jun 2017 12:22:52 +0200

lirc (0.10.0~rc2-3) experimental; urgency=medium

  * Fix broken dh_python3 invocation.
  * Don't build plugins with runtime linkage errors on kfreebsd.
  * Disable failing python unit tests on kfreebsd and hurd.

 -- Alec Leamas <leamas.alec@gmail.com>  Wed, 14 Jun 2017 16:35:02 +0200

lirc (0.10.0~rc2-2) experimental; urgency=medium

  * Don't hardcode paths to socat and expect (test tools).
  * Don't require socat for hurd builds.
  * Don't run tests if socat is missing (e. g., hurd).
  * Limit plugin load tests to look for errors.

 -- Alec Leamas <leamas.alec@gmail.com>  Tue, 13 Jun 2017 23:24:50 +0200

lirc (0.10.0~rc2-1) experimental; urgency=medium

  * New upstream release
  * Fixes upstream #290, lirc-setup does not start.
  * Copyright changes reflecting excluded files in attic/
  * Minimal testsuite.

 -- Alec Leamas <leamas.alec@gmail.com>  Tue, 13 Jun 2017 11:51:06 +0200

lirc (0.10.0~rc1-1) experimental; urgency=medium

  * New upstream release.
  * Most 0.9.4 patches upstreamed
  * debian/rules update and debian/copyright

 -- Alec Leamas <leamas.alec@gmail.com>  Fri, 19 May 2017 16:57:42 +0200

lirc (0.9.4c-9) unstable; urgency=medium

  * Fix missing systemd socket activation (Closes: #859491).
  * Fix package purge (Closes: #852118).

 -- Alec Leamas <leamas.alec@gmail.com>  Thu, 06 Apr 2017 05:23:20 +0200

lirc (0.9.4c-8) unstable; urgency=medium

  * Fix missinng deps for lirc-setup (Closes: #858144).

 -- Alec Leamas <leamas.alec@gmail.com>  Tue, 21 Mar 2017 17:50:54 +0100

lirc (0.9.4c-7) unstable; urgency=medium

  * Fix lirc_options.conf upgrade regression in 0.9.4c-6
  * Actually add the hurd build patch missing in 0.9.4c-6
  * Fix segfault on SET_INPUTLOG socket command (upstream #252).
  * Fix bad handling of ircat --config options (upstream #251).

 -- Alec Leamas <leamas.alec@gmail.com>  Thu, 05 Jan 2017 00:05:35 +0100

lirc (0.9.4c-6) unstable; urgency=medium

  * Fix unsecure permissions for /run/lirc. Closes: #848135
  * Fix missing config.h header (Upstream #250).
  * Fix HURD build (Closes: #845499)
    - Fix from Samuel Thibault
  * Add missing Suggests: for lirc-compat-remotes.
  * Fix --listen option parsing bug (upstream #249).
  * Fix bad update handling of lirc_options.conf (see: #849266).

 -- Alec Leamas <leamas.alec@gmail.com>  Tue, 20 Dec 2016 12:36:19 +0100

lirc (0.9.4c-5) unstable; urgency=medium

  * Team upload.
  * Updated README.debian, new package lirc-compat-remotes info.
  * Added patch for missing lircd-setup.service file.
  * Removed work-around for nowadays fixed  #801719.
  * Added fix for remove --purge not purging all files.
  * lirc-old2new fixes for default device.
  * Fixed to build on freebsd platforms.

 -- Alec Leamas <leamas.alec@gmail.com>  Wed, 02 Nov 2016 19:36:19 +0100

lirc (0.9.4c-4) unstable; urgency=low

  * Team upload.
  * Upload to unstable.
  * Resolves (new bugs) LP: #1636355, LP: #1636353
  * Resolves (old bugs) LP: #1497266, LP: #1565070, LP: #1395570,
    LP: #1393056, LP: #1310508, LP: #1203483, LP: #1438381,

 -- Alec Leamas <leamas.alec@gmail.com>  Fri, 28 Oct 2016 15:46:34 +0200

lirc (0.9.4c-3) experimental; urgency=medium

  * debian/control: Fix bad upgrade paths.
  * Fix bad library specification in lirc.pc (#236)

 -- Alec Leamas <leamas.alec@gmail.com>  Tue, 25 Oct 2016 21:46:06 +0200

lirc (0.9.4c-2) experimental; urgency=medium

  * Fix unconfigured clients build errors.

 -- Alec Leamas <leamas.alec@gmail.com>  Tue, 25 Oct 2016 10:32:39 +0200

lirc (0.9.4c-1) experimental; urgency=medium

  * New upstream release.
  * New tool irtext2udp.
  * Resolves build errors on kernels > 4.8.0A.
  * Most of patches upstreamed.

 -- Alec Leamas <leamas.alec@gmail.com>  Sat, 22 Oct 2016 14:52:05 +0200

lirc (0.9.4b-0.3) experimental; urgency=medium

  * Non-maintainer upload.

  [ Gianfranco Costamagna ]
  * fix arch:all build.

  [ Alec Leamas ]
  * Fix build errors on non-linux kernels.
    (conditionalize udev dependency)

 -- Gianfranco Costamagna <locutusofborg@debian.org>  Wed, 05 Oct 2016 19:30:47 +0200

lirc (0.9.4b-0.2) experimental; urgency=medium

  * Non-maintainer upload.
  * Fix build errors on non-linux kernels.
  * Declare liblirc0 as multi-arch; Closes: #812947.

 -- Alec Leamas <leamas.alec@gmail.com>  Wed, 05 Oct 2016 06:07:40 +0200

lirc (0.9.4b-0.1) experimental; urgency=medium

  * Non-maintainer upload.
  * First shot on major upstream updates.
    - Re-packaged from scratch based on new dh primitives.
    - Thanks for help on debian-mentors!
  * New upstream release 0.9.4
    - Release 0.9.1 .. 0.9.3 was never packaged.
    - Old 'lirc' service split into separate systemd services:
      lircd.service, lircmd.service and irexec.service.
    - Remote definitions moved out of lirc to new project
      lirc-remotes; affects large number of LP issues.
    - Builds also on FreeBSD 10.3.
    - Fixes "Not updated to last version" (Closes: #777199),
      LP: #1443590.
    - Fixes "Default device for mode2 is /dev/lirc" (Closes: #702140).
    - Fixes "/var/run/lirc contents disappear..." (Closes: #676343).
    - Fixes "lircrcd segfaults" (Closes: #780062).
    - Fixes "'/etc/init.d/lirc restart' is broken" (Closes: #782091).
    - Fixes "Prompting due to modified conffiles..." (Closes: #655969).
    - Fixes "LIRC installs bad udev rule" (Closes: #804397),
      users depending on this rule will need to explicitly start lircd.
    - Fixes "lirc init script can create circular symlinks", LP: #698007.
    - Fixes "Update Uploaders List (Closes: #762554).
    - Fixes "Please switch to libftdi1" (Closes:  #810370).
    - Fixes LP: #153457 "iguanaIR support not functional".
    - Fixes LP: #460027 "using lirc init script restart function fails
      sometimes".
    - Fixes LP: #499588 "lirc udev rule causes unreliable startup".
    - Fixes LP: #567519 "lircd(8) mentions non-existent
      /dev/input/uinput".
    - Fixes LP: #1029604 "mce remote doesn't work due to out of date
      lircd.conf.devinput".
    - Fixes LP: #1312287 "lircd start problem".
  * The built-in irman support is moved to the lirc-drv-irman package.
  * Revised package structure: keep old liblircclient0 (renamed to
    liblirc-client0). Adding new packages liblirc0, liblirc-dev and
    lirc-doc. Former liblircclient-dev merged into new liblirc-dev.
  * Don't overwrite existing lircd.conf file.
  * Ship sysV scripts from the svn tree [Stefan Lippers-Hollmann]
  * Add handling of obsolete 0.9.0 udev rule restarting lircd
  * Old lircd output socket link /dev/lirc dropped. Use
    /var/run/lirc/lircd.
  * Updated copyright
  * Update compiler flags: -Wl,as-needed + hardening
    [Stefan Lippers-Hollmann]
  * Avoid negative architecture deps like [!hurd] (Closes: #634807)
    [Stefan Lippers-Hollmann]
  * Add patch 0007-tools-remove-configs-symlink.patch + explicit link
    to walk around #801719 (dh_python3 shortcomings).
  * Last parts of libirman dependencies removed.
  * Changing Vcs-* headers to point to upstream packaging branch.
  * Fixes existing large number of upgrade bugs.
  * Enhance hardening flags.
  * Add a lintian pbuilder test, this requires --hookdir and B92-test-pkg
    therein.
  * Tested (build-wise) on stretch and sid.

 -- Alec Leamas  <leamas.alec@gmail.com>  Thu, 26 May 2016 11:14:25 +0100

lirc (0.9.0~pre1-1.2) unstable; urgency=medium

  * Non-maintainer upload.
  * Fix "unhandled symlink to directory conversion: /usr/share/doc/PACKAGE":
    - add "Pre-Depends: ${misc:Pre-Depends}" to lirc-x stanza in
      debian/control
    - add debian/lirc-x.maintscript with symlink_to_dir instruction
    (Closes: #774867)

 -- gregor herrmann <gregoa@debian.org>  Sat, 17 Jan 2015 19:51:55 +0100

lirc (0.9.0~pre1-1.1) unstable; urgency=low

  * Non-maintainer upload with maintainers permission.
  * Add dh-autoreconf to fix FTBFS on ppc64el. Closes: #746505

 -- Andreas Barth <aba@ayous.org>  Thu, 11 Sep 2014 09:18:17 +0000

lirc (0.9.0~pre1-1) unstable; urgency=low

  [ Sven Mueller ]
  * remove myself from uploaders

  [ Stefan Lippers-Hollmann ]
  * new upstream version 0.9.0~pre1:
    - rediff patches against 0.8.6:
      + drop 20_kcompat-2.6.26.patch, applied upstream.
      + drop 21_silence-LIRC_MODE_LIRCCODE-logmessage.patch, it's no longer
        necessary due to udev & hal acting upon hotplug events.
      + drop 22_kcompat-2.6.27.patch, applied upstream.
      + drop 23_man_pages_style_fixes.patch, mostly applied upstream.
      + drop 24_kcompat-2.6.29.patch, applied upstream.
      + drop 25_kcompat-2.6.31.patch, applied upstream.
    - fixed by the new upstream version:
      + lirc: Please update to version 0.8.4a (Closes: #517507).
      + lirc: The version upstream is now at 0.8.6. Please upgrade this
        package as it's a show stopper for me (Closes: #548826).
      + lirc-modules-source: lirc_imon doesnt find hardware (Closes: #500714).
      + lirc: Please add support for blaster of Hauppauge PVR150
        (Closes: 505049).
    - rediff patches against 0.8.7:
      + drop 23_kcompat-2.6.32.patch, merged upstream
      + drop kcompat-2.6.33.patch, merged upstream
      + drop kcompat-2.6.35.patch, merged upstream
      + add fix-kfreebsd-ftbs.patch
    - fixes FTBS on Debian/ kFreeBSD, introduced in 0.8.6
    - rediff patches against 0.9.0~pre1:
      + import upstream changes (lirc-0.8.7-63-g77c9429):
        ~ Remove-a-few-more-CVS-relics
        ~ add-release-process-notes-for-my-own-sanity
        ~ add-lirc-encoder-decoder-regression-test
        ~ make-all-remote-names-unique
        ~ updated-firefly-remote-definition-from-Bastien-Nocer
        ~ try-to-standardize-remote-key-names-a-fair-bit
        ~ lirc_serial-fill-in-dev-pointer
        ~ Attempt-to-make-lirc_sir-behave-a-bit-better
        ~ lirc_serial-resync-with-in-kernel-bits
        ~ commandir-send_status-vs.-packetCounter-bug-fix
        ~ lirc_serial-fix-tx-support-and-a-memory-leak
      + drop 99_linux-input-layer_config, it should be obsolete now.
      + drop lirc-in-kernel-ioctls, merged upstream.
      + drop 18_pinsys-keycodes.
      + update fix-kfreebsd-ftbs.patch to fix newly introduced __u32/ __u64
        breakage on kFreeBSD; extend this change to all non-linux
        architectures, given that it fails on hurd as well. Use stdint.h and
        ISO C99 uint32_t/ uint64_t.
      + drop 11_cheklib_fix.patch; while it is technically correct, it doesn't
        actually have a real effect and is not upstreamable.
      + drop 90_make-module-defines-unique.patch and warning-cleanup.patch,
        lirc-modules-source doesn't get built anymore.
      + avoid patching generated Makefiles by ensuring identical dates to avoid
        autofoo/ libtool; this allows dropping 02_Makefiles.patch.
      + drop 12_enodev_on_read.patch, it doesn't appear to be required anymore.
  * suggest setserial (Closes: #546247).
  * drop the udevadm settle call from the init script, it can lead to a
    deadlock in combination with hotpluggable/ udev aware devices.
  * fix conditional branches for 22_kcompat-2.6.27.patch (Closes: #547359).
  * switch to Debian source format 3.0 (quilt).
  * adapt watch file for bzip2 tarballs.
  * drop debian/TODO, most entries are obsolete.
  * create /var/run/lirc/ as needed.
  * use --oknodo for start-stop-daemon.
  * lirc 0.8.6 moves the lircd socket from /dev/ to /var/run/lirc/, create a
    symlink to retain compatibility with old clients.
  * partial sync with Ubuntu's lirc 0.8.6-0ubuntu2:
    [ Mario Limonciello ]
    - debian/control: add build-depends on libftdi-dev to prevent FTBFS.
    - [PATCH 8/8] Add udev support to lirc and init script
    - remove build time debug messages for kernel drivers
  * add compatibility for kernel 2.6.32 (Closes: #562512, #588027).
  * add compatibility for kernel 2.6.33/ 2.6.34.
  * add maintainerclean target to debian/rules, to ease dealing with the
    current way of maintaining the lirc package with svn-buildpackage's
    mergeWithUpstream mode.
  * document the kernel/ userspace ABI breakage between lirc 0.8.6 and earlier
    versions in NEWS.
  * debian/rules: fix stanza dependencies for parallel building (FTBS on
    buildds with activated build concurrency).
  * fix lintian complaint about "lirc: conflicts-with-version makedev
    (<< 2.3.1-88)", a recent enough makedev (or none at all, if using udev) is
    only required by postinst, not at unpack time.
  * debian/NEWS: fix cosmetic formatting issues as pointed out by lintian:
    - lirc: debian-news-entry-uses-asterisk
    - lirc: debian-news-entry-without-blank-line line 13
  * add compatibility for kernel 2.6.35.
  * bump compat level to 8, supported by debhelper >=7.9.3 in squeeze.
    - replace dh_clean -k by dh_prep.
  * drop silent clobbering of the lirc configuration with misplaced files.
  * make syntax check for hardware.conf more robust.
  * drop obsolete lirc-svga package, its functionality is also provided by
    lirc-x and has only been built for x86.
  * drop and conflict with (using breaks) lirc-modules-source, starting with
    kernel 2.6.36 lirc has been merged mainline and this package targets
    post-squeeze anyways - this indirectly fixes:
    - Failed to attach i2c client PV951 IR at 0x4b (-17) (Closes: #500429)
    - lirc 0.8.3-5 breaks mceusb2 remote (Closes: #551706), replaced by new
      in-kernel RC_CORE module "mceusb".
    - lirc_sir: device fails to resume after suspend (Closes: #414014)
    - sysfs: duplicate filename '0-0018' can not be created (Closes: #496681)
  * rename patches for upstream submission:
    - 04_man_pages_syntax_fixes.patch --> man-pages_syntax-fixes.patch
    - 05_non_linux.patch --> lirc_fix-build-on-non-Linux-architectures.patch
    - 22_fix-spelling-errors.patch --> lirc_fix-spelling-errors.patch
    - 13_hurd_define_iotbase_u32.patch --> hurd_define-iotbase_u32.patch
  * external ABI between kernel modules broke between 0.8.3 --> 0.8.4 and
    0.8.7 --> 0.9.0, break lirc-modules-source (<<0.9.0~).
  * drop obsolete debconf configuration:
    - lirc should use debconf more fully (Closes: #162933)
    - [INTL:nl] Updated Dutch po-debconf translation (Closes: #605610).
    - [INTL:da] Danish translation of the debconf templates (Closes: #607575)
  * drop pre-woody compatibility.
  * don't try to install the upstream "ChangeLog", it's empty since upstream
    moved to git.
  * don't symlink /usr/share/doc/<package>/ anymore.
  * declare a build-conflicts with libsvga1-dev.
  * suggest "ir-keytable", it is required to configure scancodes for in-kernel
    modules using the new RC_CORE subsystem.
  * bump standards version to 3.9.1, now that the major roadblocks are finally
    fixed.
  * document that lirc uses syslog for all logging functionality since 0.6.5-1,
    (Closes: #580666).
  * use current maintainer script syntax.
  * drop pre-squeeze versioned depends.

 -- Stefan Lippers-Hollmann <s.l-h@gmx.de>  Sun, 20 Feb 2011 22:32:56 +0100

lirc (0.8.3-5) unstable; urgency=low

  * fix override disparity by moving lirc-modules-source to section kernel.
  * update 05_non_linux.patch to fix an FTBS on kFreeBSD, thanks to Petr
    Salinger <Petr.Salinger@seznam.cz> and Aurelien Jarno
    <aurelien@aurel32.net> (Closes: #540742). This allows dropping
    06_libtool_kfreebsd, thanks to Aurelien Jarno.
  * use *.patch suffix consistently for all patches, no patch changes.
  * clarify patch names for manpages.
  * refresh patch series.

 -- Stefan Lippers-Hollmann <s.l-h@gmx.de>  Mon, 10 Aug 2009 16:00:21 +0200

lirc (0.8.3-4) unstable; urgency=medium

  [ Stefan Lippers-Hollmann ]
  * add kernel 2.6.27 compatibility (Closes: #506693).
  * update italian debconf translation, thanks to Vincenzo Campanella
    <vinz65@gmail.com> (Closes: #502602).
  * add kernel 2.6.29 compatibility (Closes: #537197).
  * s/(C)/©/ in copyright information.
  * add kernel 2.6.31 compatibility.
  * updating Basque debconf translation update, thanks to Piarres Beobide
    <pi+debian@beobide.net> (Closes: #513433).
  * sync with Ubuntu, where possible - thanks to Mario Limonciello
    <superm1@ubuntu.com> (Closes: #500384):
    - [PATCH 2/8] Cleanup whitespace in lirc.postinst
    - [PATCH 7/8] Source lsb init functions in init script
      - apply this patch first, we can't use any LSB function without
        sourcing it first.
      - depend on lsb-base.
    - [PATCH 3/8] Update load_modules to use LSB functions
      - keep the udevadm settle call, we need it for now.
      - local var=foo is neither allowed by SUSv3, nor by Debian's special
        excemptions; fix this bashism/ dashism.
      - continue to use tab to indent.
    - [PATCH 4/8] Update build_args to only check a single device
      - local var=foo is neither allowed by SUSv3, nor by Debian's special
        excemptions; fix this bashism/ dashism.
      - continue to use tab to indent.
    - [PATCH 5/8] Use LSB functions to show errors when conf files are missing
      - continue to use tab to indent.
      - remove commented out tests.
    - [PATCH 6/8] Cleanup case statement to use LSB functions and whitespace
      cleanup
      - continue to use tab to indent.
      - fix newly introduced syntax errors.
  * employ standard line wrapping in debian/control stanzas.
  * refer to GPL-2 explicitly in debian/copyright.
  * make lintian happy and don't call ucf with its full path (policy 6.1).
  * install upstream changelog also into arch-indep packages.
  * severity medium, as this fixes lirc-modules-source FTBS against
    kernel >= 2.6.27.

  [ Matthew Johnson ]
  * update some manpage patches (04_man_pages/22_man_pages2). Patches thanks
    to Philipp Matthias Hahn <pmhahn@debian.org>. (Closes: #513675)

 -- Stefan Lippers-Hollmann <s.l-h@gmx.de>  Fri, 07 Aug 2009 00:38:08 +0200

lirc (0.8.3-3) unstable; urgency=low

  * update swedish translation, thanks to Martin Bagge <brother@bsnet.se>
    (Closes: #491772).
  * add italian debconf translation, thanks to Vincenzo Campanella
    <vinz65@gmail.com>.
  * silence LIRC_MODE_LIRCCODE log message, as it is not rate limited and
    tends to overflow syslog in case IR receivers get removed without
    stopping lirc or removing the configuration; this is a temporary
    band-aid for lenny and no long term solution (Closes: #500421).

 -- Stefan Lippers-Hollmann <s.l-h@gmx.de>  Tue, 30 Sep 2008 01:28:27 +0200

lirc (0.8.3-2) unstable; urgency=medium

  * remove dead code (modutils has only been used for kernel 2.4 and the
    affected code blocks weren't reachable since 0.8.3-1 anyways, as the
    conffile wasn't shipped in the first place).
  * conflict with makedev << 2.3.1-88, lirc either needs a fixed version or
    none at all (Closes: #477063).
  * 0.8.3-1 hasn't transitioned to testing yet, so keep the urgency at medium
    as it fixes several serious bugs (oops in lirc_i2c on kernel 2.6.25, FTBS
    against 2.6.26, missing module versions rejected by kernel >= 2.6.26,
    custom mknod replaced by proper makedev calls, if installed).

 -- Stefan Lippers-Hollmann <s.l-h@gmx.de>  Wed, 16 Jul 2008 13:35:32 +0200

lirc (0.8.3-1) unstable; urgency=medium

  [ Stefan Lippers-Hollmann ]
  * new upstream release 0.8.3 (Closes: #481649).
  * rediff patches:
    - 02_Makefile.in
    - 04_man_pages
    - 05_non_linux
    - 06_libtool_kfreebsd
  * drop patches merged upstream:
    - 16_kcompat-2.6.23
    - 17_kcompat-2.6.24
    - 20_kcompat-2.6.25
    - 19_enable-macmini-as-userspace-driver
  * remove local scope definition for variables in lirc.init.d following
    SUSv3, its current use for MODULES_MISSING and ARGS doesn't justify
    making use of the exceptions specified in Debian policy 10.4
    (Closes: #471422).
  * fix copy and paste error in lirc-modules-source.README.Debian.
  * lirc_i2c: fix kernel oops on 2.6.25, patch taken from upstream CVS.
  * change debconf defaults for lirc-modules-source:
    - drop lirc_gpio, it is affected by API changes in bttv and FTBS since
      2.6.23.
    - enable atiusb.
    - enable bt829.
    - enable cmdir.
    - enable igorplugusb.
    - enable imon.
    - enable it87.
    - enable mceusb/ mceusb2.
    - keep lirc_parallel disabled, it is not SMP safe.
    - enable sasem.
    - enable streamzap.
    - enable sir, keep the defaults at generic sir controller (other) port
      0x2f8 and irq 3, which seems to be supported by a short poll among
      notebook owners.
    - enable serial, keep defaulting to generic (home-brewed) IR receivers,
      change to ttyS0 (port 0x3f8, irq 4) as most concurrently sold systems
      only ship one serial port.
  * replace custom mknod usage by using makdev's newly added lirc support and
    add a versioned dependency on a fixed makedev version instead. This
    dependency can be relaxed to udev | makedev, once makedev (>= 2.3.1-88)
    has been shipped in a stable release. Given that Breaks support isn't
    usable until lenny+1, this conservative approach is the safer variant for
    etch --> lenny upgrades (Closes: #393575, #477063).
  * drop debian/lirc.config.in, which was added as a bandaid for #329897
    alltogether, neither it nor setup-driver.sh are used anywhere on the end
    user's system; this allows dropping the pre-dependency on dialog and
    lirc.config.md5sum as well.
  * add a sanity check to debian/rules' clean target to ensure that
    liblirclient0's pkg-config file is up to date.
  * add compatibility code for udev >= 0.117, avoid flag day changes or a hard
    dependency on udev; inspired by Scott James Remnant <scott@ubuntu.com>
    (Closes: #456325).
  * restructure lirc-modules-source package to dump all module sources
    directly into the toplevel directory (omit upstream's Makefiles from
    module subdirectories) and replace custom toplevel Makefile with a simple
    in-kernel style buildsystem. This fixes symbol versioning for the kernel
    modules and, as a side effect, the clean target of the top-level Makefile
    and doesn't allow empty port/ IRQ settings.
    (Closes: #450521, #483089, #369076)
  * add compatibility patch for kernels >= 2.6.26, based on upstream CVS.
  * drop debian/lirc.modules, modutils is obsolete (kernel 2.4).
  * make lirc-modules-source compatible with linux-modules-extra-2.6:
    - use bzip2 to compress the source tarball.
    - change path names to correspond with the package name.
  * fix LIRC_IRQ redefinition.

  [ Matthew Johnson ]
  * Add pkg-config file (Closes: #421881)

  [ Sven Mueller ]
  * Add swedish translation (Closes: #483766)

  [ Matthew Johnson ]
  * Raise priority to medium since it fixes kernel-related bugs

 -- Matthew Johnson <mjj29@debian.org>  Tue, 15 Jul 2008 18:56:26 +0100

lirc (0.8.2-2) unstable; urgency=low

  [ Sven Mueller ]
  * Add some additional checks to the init script (Closes: #394663)
  * Update lirc-modules-source README.Debian to refer to module-assistant
    (Closes: #429249)
  * New upstream closes: #409394,#432801,434569,#350318,#399135,#400494,#368075
  * dpkg-reconfigure lirc-modules-source will now make
    /etc/lirc/lirc-modules-source.conf world-readable. This should not be a
    security risk, but allows building modules as a user via fakeroot. This
    closes: #445324

  [ Matthew Johnson ]
  * New translations (Closes: #443470)
    - cs (Closes: #451793)
    - fr (Closes: #445587)
    - fi (Closes: #445650)
    - pt_BR (Closes: #445736)
    - es (Closes: #459267,#463737)
    - nb (Closes: #443470,#470104)
    - ru (Closes: #445426)
    - de (Closes: #445556,#446378)
    - pt (Closes: #445653)
    - cs (Closes: #451793)
  * Add slh to uploaders, remove old developers.
  * Refactor patches to use quilt and update dependencies
  * Add Linux Input Layer remote config (Closes: #297290)

  [ Stefan Lippers-Hollmann ]
  * remove devfs support, it got removed in mainline linux for 2.6.18 so
    neither etch nor lenny are affected.
  * add LSB header to lirc initscript as suggested by Petter Reinholdtsen
    <pere@hungry.com> (Closes: #460212).
  * add LSB Description and Short-Description to initscript LSB stanza,
    borrowed from Ubuntu's lirc packages by Mario Limonciello
    <superm1@ubuntu.com>.
  * apply patch from Václav Ovsík <vaclav.ovsik@i.cz> to fix Makefile
    mangling for lirc-source, evaluating utsrelease.h instead of the no longer
    existing version.h and recommend linux-image-$KVERS instead of the
    obsolete kernel-image-$KVERS (Closes: #447172).
  * drop no longer existing dpatch suffix from patch series and refresh
    existing patches.
  * add compatibility patch for kernels >= 2.6.24, based on upstream CVS
    (Closes: #399135, #434569, #457858, #463388, #464777).
  * fix lirc.conf template for pinsys remotes, shortly before lirc 0.8.2 the
    keymapping got broken.
  * remove versioned download location from debian/copyright, it's always
    outdated and the base path will point to the download location just as
    well.
  * apply useful indention from Ubuntu to debian/rules.
  * Recommend module-assistant | kernel-package for lirc-modules-source.
  * add watch file pointing to lirc.org, not sourceforge.
  * restore author information and short descriptions for debian/patches/*.
  * add Basque translation "eu", thanks to Christian Perrier
    <bubulle@debian.org> and Piarres Beobide <pi@beobide.net>
    (Closes: #470363).
  * fix debian/copyright to refer to "GPL v2 or later", not a single source
    file seems to be licensed under the GPL v1.
  * rewrite debian/modules-source/debian/rules from scratch and rely on common
    kernel module handling based in module-assistant, this allows bumping the
    standards version to 3.7.3 (Closes: #372815, #440514).
  * add Homepage, Vcs-Svn and Vcs-Browser tags.
  * modules-source/README.make is obsolete, as it only talks about kernel 2.2
    and 2.4 specifics, while kernel 2.6 is covered by the other READMEs.
  * drop bogus Recommends from lirc-modules-source, build-essentials are an
    implicit requirement by definition.
  * drop no longer valid statements from the module READMEs.
  * no longer try to install etc/modutils/*, lenny will not support kernel
    2.4.
  * bump compat level to 5, which is supported by etch (backports), but lets
    dh_install error out if wildcards expand to nothing.
  * drop 03_extra_files, shipping private copies of bttv headers for random
    kernels doesn't work.
  * run debconf-updatepo, confirm that no strings get lost.
  * remove informal_module_building(), while it may look convenient to the
    user, the results were unpackaged modules of questionable quality that
    cannot be removed on purge. module-assistant or make-kpkg are the
    preferred way of module building (Closes: #404505).
  * Update and partly rewrite the module source documentation to the new
    packaging and explicitly mention the full source requirement for gio
    (Closes: #429249).
  * add patch based on upstream CVS to include the macmini driver in the
    hw_list used for calculating the userspace daemon config options
    (Closes: #448637).
  * set doc-base section to "Help", which seems to be suited best for a
    collection of pointers about how to work with the LIRC package.
  * fix broken whatis headers in shipped manpages.

 -- Stefan Lippers-Hollmann <s.l-h@gmx.de>  Sat, 15 Mar 2008 02:18:01 +0100

lirc (0.8.2-1) experimental; urgency=low

  * Initial release of new upstream

 -- Sven Mueller <sven@debian.org>  Tue, 16 Oct 2007 18:28:57 +0200

lirc (0.8.0-14) unstable; urgency=low

  [ Christian Perrier ]
  * Debconf templates and debian/control reviewed by the debian-l10n-
    english team as part of the Smith review project. Closes: #443270, #443470
    (the latter bug is about outdated translations)

  [Debconf translation updates]

  * Japanese. Closes: #444091
  * Vietnamese. Closes: #444436
  * Galician. Closes: #444752
  * Russian. Closes: #445426
  * German. Closes: #445556, #446378
  * French. Closes: #445587
  * Finnish. Closes: #445650
  * Portuguese. Closes: #445653
  * Brazilian Portuguese. Closes: #445736
  * Czech. Closes: #445655

  [ Sven Mueller ]
  * Add compatibility patch for kernels >= 2.6.23 (closes: #446650)

 -- Sven Mueller <sven@debian.org>  Tue, 16 Oct 2007 17:02:54 +0200

lirc (0.8.0-13) unstable; urgency=low

  [ Loic Minier ]
  * Update 14_no_linux_config_h patch to also drop <linux/config.h> include
    from lirc_atiusb/lirc_atiusb.c, lirc_bt829/lirc_bt829.c,
    lirc_cmdir/lirc_cmdir.c, lirc_igorplugusb/lirc_igorplugusb.c,
    lirc_imon/lirc_imon.c, lirc_it87/lirc_it87.c, lirc_mceusb/lirc_mceusb.c,
    lirc_mceusb2/lirc_mceusb2.c, lirc_parallel/lirc_parallel.c,
    lirc_sasem/lirc_sasem.c, lirc_serial/lirc_serial.c, lirc_sir/lirc_sir.c,
    lirc_streamzap/lirc_streamzap.c; thanks Florent Rougon; see #400494 and
    #436166.

  [ Sven Mueller ]
  * add patch to replace SLAB_ATOMIC usage with the more current equivalent
    GFP_ATOMIC.
  * incorporate update to debconf templates, thanks to Christian Perrier and
    the english l10n team. (Closes: #443270)
  * Update german translation
  * Add option to start irexec in daemon mode from /etc/init.d/lirc (Closes:
    #184245)
  * Add myself to the Uploaders field
  * Update galician (Closes: #444752), vietnamese (Closes: #444436) and
    japanese (Closes: #444091) debconf translations.

 -- Sven Mueller <sven@debian.org>  Wed,  3 Oct 2007 15:04:58 +0200

lirc (0.8.0-12) unstable; urgency=medium

  * Fix bashism in rules; thanks Martin F Krafft; closes: #437530.

 -- Loic Minier <lool@dooz.org>  Mon, 13 Aug 2007 09:55:28 +0200

lirc (0.8.0-11) unstable; urgency=low

  * Update config.guess and .sub with autotools-dev's versions before running
    configure.

 -- Loic Minier <lool@dooz.org>  Sun, 12 Aug 2007 11:04:48 +0200

lirc (0.8.0-10) unstable; urgency=low

  * Add myself to uploaders for some QA work.
  * Cleanup changelog.
  * Wrap build-deps, deps, and uploaders.
  * Use ${binary:Version} instead of ${Source-Version}.
  * Cleanup rules.
  * Merge diff from 0.8.0-9.3 NMU; thanks Steffen Joeris.
  * Merge diff from 0.8.0-9.2 (and 0.8.0-9.1?!) NMUs; thanks
    Christian Perrier.
  * Merge 0.8.0-9.1 changelog entry into 0.8.0-9.2 as it seems there never was
    a 0.8.0-9.1 upload.
  * Update Vietnamese Debconf translation; thanks Clytie Siddall;
    closes: #427007.
  * Drop funny "set -e" from rules.
  * Only pass --host to configure if DEB_HOST_GNU_TYPE and DEB_BUILD_GNU_TYPE
    differ.
  * Honor make clean errors.
  * Add Russian Debconf translation; thanks Yuri Kozlov; closes: #432743.
  * Check whether $START_LIRCMD and $START_LIRCD equals true instead of
    checking whether it's non-empty as the init script sets these to "false"
    in some cases; thanks Achim Lobbert; closes: #424912.
  * New dpatch, 12_enodev_on_read, close device if read() returns ENODEV;
    fixes infinite loop; thanks Alexander V. Inyukhin; closes: #430898.
  * Drop -k flag to modprobe in init scripts; is undocumented and seems to be
    a noop.
  * New dpatch, 13_hurd_define_iotbase_u32, define _IOT__IOTBASE___u32 if
    missing; fixes build failure on hurd; thanks Samuel Thibault;
    closes: #436570.
  * Do not build-dep on libusb-dev on hurd-i386; thanks Samuel Thibault;
    closes: #436570.
  * New dpatch, 14_no_linux_config_h, drops linux/config.h include which isn't
    available anymore, but doesn't seem necessary either; parly fixes #436166,
    it seems to also require bttv.h which went missing from linux-headers-*.

 -- Loic Minier <lool@dooz.org>  Fri, 10 Aug 2007 15:11:20 +0200

lirc (0.8.0-9.3) unstable; urgency=high

  * Non-maintainer upload during BSP
  * Fix unconditional use of debconf in postrm (Closes: #416930)

 -- Steffen Joeris <white@debian.org>  Sat, 19 May 2007 22:24:22 +1000

lirc (0.8.0-9.2) unstable; urgency=low

  * Non-maintainer upload to fix pending l10n issues.
  * Debconf translations:
    - German. Closes: #399304
    - Galician. Closes: #407277
    - Swedish. Closes: #408289
    - Spanish. Closes: #393864

 -- Christian Perrier <bubulle@debian.org>  Sat, 17 Feb 2007 18:05:06 +0100

lirc (0.8.0-9) unstable; urgency=low

  * Rebuilding to fix and erroneous depend. (Closes: #393316, #393297, #393351)

 -- Hector Garcia <hector@debian.org>  Mon, 16 Oct 2006 11:18:21 +0200

lirc (0.8.0-8) unstable; urgency=low

  [ Hector Garcia ]
  * Added 09_lirc_drivers_2.6.18_compatibility patch by Thomas Creutz
    (Closes: #387715)
  * Fixed 03_extra_files to support 2.6.17 and 2.6.18. By Thomas Creutz
    (Closes: #387715, #378395)
  * Updated cs.po by Miroslav Jezbera. (Closes: #389248)
  * Added patch to lirc_i2c from upstream CVS. By Jim Heck
  * Added patch 11_cheklib_fix to remove extra depends.
  * Updated po/es.po

  [ Amaya Rodrigo Sastre ]
  * Use debian/compat instead of DH_COMPAT=4 in debian/rules. Thanks Guillem
    Jover for pointing this out.

 -- Amaya Rodrigo Sastre <amaya@debian.org>  Tue, 10 Oct 2006 10:31:48 +0200

lirc (0.8.0-7) unstable; urgency=low

  * Update french debconf template (Closes: #384619)
  * Update logcheck file (Closes: #385025)

 -- Julien Danjou <acid@debian.org>  Mon, 18 Sep 2006 14:00:57 +0200

lirc (0.8.0-6) unstable; urgency=low

  [ Amaya Rodrigo Sastre ]
  * Added debconf templates translation update:
    - French (Closes: #370479).
    - Portuguese (Closes: #373129).
    - Dutch (Closes: #373828).
    - Japanese (Closes: #379937).
  * Use DH_COMPAT=4 in debian/rules. Got rid of debian/compat.
  * Added debconf-updatepo to de debian/rules clean target (Closes: 372911).

  [ Hector Garcia ]
  * Updated debian/patches/04_man_pages.dpatch

 -- Hector Garcia <hector@debian.org>  Fri, 18 Aug 2006 22:23:46 +0200

lirc (0.8.0-5) unstable; urgency=low

  [ Aurelien Jarno ]
  * debian/modules-source/debian/rules: simplify the call to
    dpkg-architecture.
  * debian/modules-source/debian/rules: take account of old dpkg-architecture
    output.  (Closes: #371050).
  * debian/control: Recommends dpkg-dev (>= 1.13). Drop the recommends on
    dpkg (>= 1.13).

  [ Julien Danjou ]
  * Don't create udev queue in init script (Closes: #370745)

 -- Julien Danjou <acid@debian.org>  Sun, 11 Jun 2006 14:18:07 +0200

lirc (0.8.0-4) unstable; urgency=low

  * Wait for devices to be up using udevsettle (Closes: #362217)
  * Updated dutch po-debconf translation (Closes: #370218)
  * Fix lintian warning about lirc and lirc-modules-source templates

 -- Julien Danjou <acid@debian.org>  Sun,  4 Jun 2006 16:44:13 +0200

lirc (0.8.0-3) unstable; urgency=low

  [ Cyril Lacoux ]
  * Added 08_min_code_repeat.dpatch, to allow proper interpretation of repeat
    signals for Creative RM-900 (Closes: #367521).

  [ Aurelien Jarno ]
  * Updated German debconf templates translation. Thanks to Franz Pletz
   (Closes: #367874).

 -- Julien Danjou <acid@debian.org>  Tue, 23 May 2006 11:01:08 +0200

lirc (0.8.0-2) unstable; urgency=low

  [ Julien Danjou ]
  * Include etc/lirc in lirc-modules-source.dirs (Closes: #342568)
  * Fix compilation for non-root users (Closes: #297170)

  [ Aurelien Jarno ]
  * Updated German debconf templates translation. Thanks to Franz Pletz
    (Closes: #367274).
  * Fixed typos in debconf templates (Closes: #312498).

 -- Julien Danjou <acid@debian.org>  Tue, 16 May 2006 12:45:59 +0200

lirc (0.8.0-1) experimental; urgency=low

  [ Hector Garcia ]
  * New upstream release. (Closes: #349641, #352573)
    - Added support up to for 2.6.15 kernels.
    - dvico driver is enabled by default (Closes: #348753)
  * Removed 02_aclocal.dpatch, not needed anymore.
  * Ported 04_man_pages to this release.
  * Ported 01_irxevent.dpatch to this release.
  * Changed with-drivers to userspace to build only the userspace drivers
    and keep only the kernel-space on the modules package.
  * Added 02_Makefile.in.dpatch, to prevent autotools from getting run on
    every build.
  * Recompile with driver=userspace (Closes: #352767, #351723, #348390)

  [ Julien Danjou ]
  * Add lirc_dev dependency to it87
  * Fix build-depends on libsvga1-dev rather than svgalibg1-dev
    (Closes: #350791)
  * Add lircrcd
  * Add a patch to allow some drivers to compile with linux 2.6.16
  * Add patches from Cyril Lacoux <clacoux@easter-eggs.com>
    - Compile all modules
    - Support 2 flavors for it87 (standard/digimatrix)
    - Improve debconf template
    - module-assistant works fine
    - Add missing files for gpio

  [ Aurelien Jarno ]
  * Added Swedish debconf templates translation. Thanks to Daniel Nylander
    (Closes: #339544)
  * Added Dutch debconf templates translation. Thanks to Kurt De Bree
    (Closes: #364033)
  * Enable lirc-svga on amd64.
  * Added support for non-Linux architectures:
    - Don't build-depends on libasound2-dev on hurd-i386, kfreebsd-i386 and
      kfreebsd-amd64.
    - Added 05_non_linux.dpatch, to make lirc buildable on non-Linux
      architectures.
    - Added 06_libtool_kfreebsd.dpatch, to update libtool for GNU/kFreeBSD.
  * Changed lirc-modules-source from Arch: any to Arch: all.

 -- Julien Danjou <acid@debian.org>  Wed, 10 May 2006 13:40:57 +0200

lirc (0.7.2-2) unstable; urgency=low

  * Ready for unstable.

 -- Hector Garcia <hector@debian.org>  Sun, 15 Jan 2006 03:58:59 +0100

lirc (0.7.2-1) experimental; urgency=low

  * New upstream release. (Closes: #310133)
    - support for KeySym and KeyCode in key definition
    - updated udev support for 2.6.13 kernels
    - added support for new version of Windows Media Center Remotes
    - Use all 8 bytes of IR code
    - Rewritten Sasem driver
    - added support for Asus Digimatrix
    - added support for Remotec Multimedia PC Remote BW6130
    - Added support for iMON-PAD and iMON-RSC
    - Man page for lircd doesn't talk about the wrond -D flag
      (Closes: #301688)
  * Change build-depend to kernel-source.
  * Change configure option --with-drivers to none on debian/rules.
  * Separated build and configure stages.
  * Deleted useless patch 01_configure-duplicates.dpatch
  * Deleted obsolete patch 02_forgotten-files.dpatch
  * Rewrite of 03_irxevent.dpatch to new version and renamed to 01_...
  * Rename 04_aclocal.dpatch to 02_aclocal.dpatch
  * Changed mv to cp on modules-source/Makefile
  * Updated po/es.po
  * Runned debconf-updatepo. (Closes: #329200)
  * Updated cs.po, da.po, es.po, de.po (not all, only fuzzy), fr.po, ja.po and
    vi.po
  * Created 03_extra_files.dpatch so module compilation only depends on
    kernel-headers. (Only 2.6.12 currently since is the only one for 2.6.x in
    debian that is supported upstream. Custom kernels should still use
    kernel-source).
  * Deleted build-depend on kernel-source.
  * Added depend on ucf.
  * Added myself to uploaders and cleaned control file a bit.
  * Make dpkg-reconfigure work even when no /etc/lirc/lirc-modules.conf found
    (Closes: #342027)
  * Added support for udev. Applied patch from dann frazier. (Closes: #303494)
  * Added patch 04_man_pages.dpatch to fix hyphen-used-as-minus-sign problem.
    I should send this upstream soon.
  * Cleaned a few lintian warnings on maintainer scripts.

 -- Hector Garcia <hector@debian.org>  Thu,  5 Jan 2006 11:13:54 +0100

lirc (0.7.1pre2-11) unstable; urgency=low

  * This upload sponsored by The Spanish Public Administration Department.
  * Debian Policy 10.7.3. ("[Conffiles] must not be modified by the maintainer
    scripts during installation (or at any other time). Apply wonderful patch
    from Nicolas Boullis . (Closes #334170).

 -- Amaya Rodrigo Sastre <amaya@debian.org>  Mon, 17 Oct 2005 16:30:37 +0200

lirc (0.7.1pre2-10) unstable; urgency=low

  * The "Follow the white rabbit" Release.
  * Temporarily include upstream's complete setup-driver.sh into
    debian/lirc.config.in so as to temporarily fix this issue. Another
    temporary workaround is to install lirc-modules-source. See #329897.
    I suck.

 -- Amaya Rodrigo Sastre <amaya@debian.org>  Mon, 10 Oct 2005 17:39:02 +0200

lirc (0.7.1pre2-9) unstable; urgency=low

  * Changed priority from optional to extra, learn to read, now change
  liblircclient's priority to optional. Hopefully end this absurd loop.

 -- Amaya Rodrigo Sastre <amaya@debian.org>  Mon, 19 Sep 2005 18:19:06 +0200

lirc (0.7.1pre2-8) unstable; urgency=low

  * Changed priority from extra to optional, to get rid of override
    disparities.
  * Apply patch from zapdvb to irxevent, that also contains patch from
    #326703, making lirc more stable when used with cpu intensive applications
    like mplayer (Closes: #328697).
  * Apply japanese debconf translation (Closes: #302487).
  * Fixed fuzzy string in debconf .po files (Closes: #302430). Also updated
    es.po.
  * Corrected lirc-modules-source.conf so that it documents the right way to
    separate the list of drivers (should be space separated, not comma
    separated). (Closes: #312102).
  * libusb-dev is already listed in Build-Depends, so this bug should have
    been already fixed (Closes: #317158).
  * Find the kernel source by testing for $KSRC/include/linux/version.h.
    (Closes: #301590).

 -- Amaya Rodrigo Sastre <amaya@debian.org>  Sun, 18 Sep 2005 11:55:30 +0200

lirc (0.7.1pre2-7) unstable; urgency=low

  * The "Kicked out from the MIA Team, by Debconf5 and RL meetings" Release.
  * Acknowledge bugs closed by previous NMU. Thanks Blars!
    (Closes: #315579, #318268, #312497, #301639, #302141).
  * Applied patch from Agustin Martin <agustin.martin@hispalinux.es>, fixing:
    - Get rid of unknown symbols when inserting lirc_sir.ko
    - Build when two drivers requiring lirc_dev are selected
    - Build the atiusb driver properly
    (Closes: #303663, #304609, #300989).
  * Apply patch supplied by Juergen Pfennig, making irxevent send keys to the
    right application. (Closes: #326703).
  * Apply patch from Robert Bihlmeyer <robbe@orcus.priv.at> to partially take
    care of #303078, while a more elegant solution is found.
  * Apply patch from Alban <browaeys.alban@wanadoo.fr> to correct spurious
    warning with aclocal >= 1.8.  (Closes: #305291).
  * And last, but not least, make litian happy:
    - Get rid of some bashisms with help from Guillem Jover
    - Avoid deprecated use of chown (ie. s/root.root/root:root/).
  * Special thanks to J. Carlos Garcia Sogo for the quick tutorial on dpatch.

 -- Amaya Rodrigo Sastre <amaya@debian.org>  Sat, 17 Sep 2005 20:47:15 +0200

lirc (0.7.1pre2-6.1) unstable; urgency=low

  * 0 day NMU for RC bug durring bug squishing party
  * remove unportable -v option from md5sum command in debian/rules
    (only one of the two md5sum programs in debian has it)
    (closes: #315579)
  * standards version 3.6.2 (no changes)
  * fix lirc-modules-source for dpkg 1.13, add versioned dpkg dependancy
    (closes: #318268)
  * Vietnamese debconf translation (closes: #312497)
  * add build-dependency on libxt-dev (closes: #301639, #302141)

 -- Blars Blarson <blarson@blars.org>  Sat,  3 Sep 2005 00:12:27 +0000

lirc (0.7.1pre2-6) unstable; urgency=low

  * back to priority optional. I am really confused now :)

 -- Amaya Rodrigo Sastre <amaya@debian.org>  Mon, 28 Mar 2005 23:10:45 +0200

lirc (0.7.1pre2-5) unstable; urgency=low

  * Now really close (Closes: #301570), instead of closing 301589 twice, now
    instead of looking for Rules.make or Makefile, we test for
    $KSRC/include/linux/version.h. Also (Closes: #199869).
  * Leave debian/liblircclient-dev.install alone (Closes: #301723).
  * Add french debconf template (Closes: #301825).

 -- Amaya Rodrigo Sastre <amaya@debian.org>  Sun, 27 Mar 2005 23:12:16 +0200

lirc (0.7.1pre2-4) unstable; urgency=low

  * Remove liblirc_client.so.0.0.0 from debian/liblircclient-dev.install
    (Closes: #301589).
  * Do not look for Rules.make while building lirc-modules, as it is no longer
    shipped with kernels above 2.6.1x (Closes: #301589).
  * Changed priority optional from extra.

 -- Amaya Rodrigo Sastre <amaya@debian.org>  Sun, 27 Mar 2005 01:45:14 +0100

lirc (0.7.1pre2-3) unstable; urgency=low

  * The "I love to do some lirc housekeeping now that we're really going to
    release Sarge" Release.
  * Make /etc/init.d/lirc point to more useful doc regarding howto configure
    lircd (Closes: #239196).
  * Fix makefile for lirc-modules-source so that ati_usb is properly built.
    Thanks to James Stark for the patch (Closes: #300989).
  * lirc 0.7.1 is now in testing and does build with 2.6 (Closes: #300587).
  * Fixed installatation tutorial typo mistake (Closes: #299647).
  * Lirc has been logging to syslog properly identifying itself probably for
    some time now (Closes: #164536).
  * Build depend on libusb-dev so that the userspace driver for ATI USB
    remotes (amongst others) is supported (Closes: #294248).
  * If DEVICE is set to /dev/lirc and devfs is in use /dev/lirc/0 will be
    automatically used instead (Closes: #197306).
  * s/auido/audio/g in debian/lirc.config, ChangeLog, setup.data and setup.sh.
  * Maybe (Closes: #290903) in debian/lirc.config.
  * Fixed manpage-section-mismatch in doc/man/lircd.8 and doc/man/lircmd.8.

 -- Amaya Rodrigo Sastre <amaya@debian.org>  Fri, 25 Mar 2005 23:48:33 +0100

lirc (0.7.1pre2-2) unstable; urgency=low

  * Applied patch from Thomas Schmidt, thanks!. (Closes: #294720).

 -- Amaya Rodrigo Sastre <amaya@debian.org>  Sat, 12 Mar 2005 00:01:46 +0100

lirc (0.7.1pre2-1) unstable; urgency=low

  * New upstream release (Closes: #294174).
  * s/serial_CFLAGS/SERIAL_CFLAGS/a in Makefile (Closes: #294689).
  * Added support for ati_usb modules (Closes: #297243).
  * GNU config automated update: config.sub (20020307 to 20041130),
    config.guess (20020320 to 20041112)

 -- Amaya Rodrigo Sastre <amaya@debian.org>  Thu, 10 Mar 2005 00:27:20 +0100

lirc (0.7.1pre1-2) unstable; urgency=low

  * The "And when it rains, it poures" Release.
  * Fixed the nasty "setup-driver.sh not found" bug, again. This fix also
    should fix the debconf freeze (Closes: #269833, #292637, #293091)
    Thanks to Chris Boyle <cmb@debian.org> for spotting the fix.
  * Included patch from "Eloy A. Paris" <peloy@debian.org> (Closes: #292043)
    so that lirc_dev gets shipped.
  * Partially included  patch for Makefile from Yann Rouillard
    <yann@pleiades.fr.eu.org> (Closes: #246112, #287328, ) so that correct
    modules and symbols get installed for 2.6.x kernels.
  * Improved paths in README.Debian (Closes: #218888).
  * Suggest just kernel-source and not headers (Closes: #250570).
  * It now builds with 2.6 kernels (Closes: #221023). I'm terrible with lirc
    bugs housekeeping :)
  * Newewst upstream versions fix i2c build problems (Closes: #256986). More
    housekeeping here.
  * GNU config automated update: config.sub (20020307 to 20041130),
    config.guess (20020320 to 20041112)

 -- Amaya Rodrigo Sastre <amaya@debian.org>  Tue, 25 Jan 2005 22:29:15 +0100

lirc (0.7.1pre1-1) unstable; urgency=low

  * New upstream release.

 -- Amaya Rodrigo Sastre <amaya@debian.org>  Sun, 23 Jan 2005 02:51:59 +0100

lirc (0.7.0.1-2) unstable; urgency=low

  * The "I can't believe nobody reported a RC bug yet!" release.
  * Changed section from optional to extra to make installer@ftp-master happy.
  * Change short decriptions in order to comply with new lintian check.
  * GNU config automated update: config.sub (20020307 to 20041130),
    config.guess (20020320 to 20041112)

 -- Amaya Rodrigo Sastre <amaya@debian.org>  Sun, 23 Jan 2005 02:51:48 +0100

lirc (0.7.0.1-1) unstable; urgency=low

  * The "let's try to fix the versioning mistake" release. I mistakenly took
    0.7.0pre8 as later than 0.7.0, so this is actually upstream latest
    tarball, 0.7.0, with a made up version number.
  * Not try to build /dev/lirc during build (Closes: #287559). Thanks to Lars
    Wirzenius <liw@iki.fi>.
  * Include setup-driver.sh (Closes: #287370). Thanks to Lars Wirzenius
    <liw@iki.fi>.
  * This upstream version really closes (Closes: #236573, #255383, #280548).
  * The Danish debconf po is included! (Closes: #276699).
  * GNU config automated update: config.sub (20020307 to 20041130),
    config.guess (20020320 to 20041112)

 -- Amaya Rodrigo Sastre <amaya@debian.org>  Sat, 15 Jan 2005 14:41:42 +0100

lirc (0.7.0pre8-1) unstable; urgency=low

  * New upstream release.
  * GNU config automated update: config.sub (20020307 to 20041130),
    config.guess (20020320 to 20041112)

 -- Amaya Rodrigo Sastre <amaya@debian.org>  Sun, 26 Dec 2004 07:48:16 +0100

lirc (0.7.0-1) unstable; urgency=low

  * New upstream release (Closes: #236573, #280548, #236573).
  * Now builds with 2.6.x (Closes: #255383, #221023).
  * GNU config automated update: config.sub (20020307 to 20040624),
    config.guess (20020320 to 20040813)
  * Added Danish po-debconf translation for lirc (Closes: #276699).
  * Removed Ian Murdock from Uploaders.
  * GNU config automated update: config.sub (20040624 to 20041130),
    config.guess (20040813 to 20041112)

 -- Amaya Rodrigo Sastre <amaya@debian.org>  Tue, 28 Dec 2004 04:44:30 +0100

lirc (0.6.6-13) unstable; urgency=low

  * The "Happy birthday Ranty" release (Sept 24th).
  * The "Happy birthday Amaya" release (Sept 25th).
  * The "Pierre, we are so glad you are back home and feeling better" release.
  * Fixed path in README.Debian (Closes: #218888)
  * Fix debconf prompt freeze (Closes: #269833)
  * debian/modules-source/README: s/WARMING/WARNING/

 -- Amaya Rodrigo Sastre <amaya@debian.org>  Sat, 25 Sep 2004 19:57:49 +0200

lirc (0.6.6-12) unstable; urgency=low

  * The "Ranty is missed everyday" release.
    Happy hacking in Heaven, our friend+brother (Closes: #252156).
  * 4 new maintainers (Closes: #248767).
  * Added Pierre Machard, Riku Voipio and Ian Murdock to the Uploaders field.
  * GNU config automated update: config.sub (20040312 to 20040624),
    config.guess (20040312 to 20040813)
  * Get rid of config.log and config.status in the clean target.
  * Included French Debconf Translation (Closes: #262379).
  * Included Czech Debconf Translation (Closes: #261285).
  * Added support for CFLAGS in the build target.

 -- Amaya Rodrigo Sastre <amaya@debian.org>  Fri, 27 Aug 2004 20:21:00 +0200

lirc (0.6.6-11) unstable; urgency=low

  * Apply patch from : Goswin von Brederlow (closes: #259978)
    - lirc-svga is only build for i386

 -- Pierre Machard <pmachard@debian.org>  Sun, 18 Jul 2004 01:06:08 +0200

lirc (0.6.6-10) unstable; urgency=low

  * Add a test to know if smode2 is available for the target arch
    (thanks to mrvn)
  * Change priority to optional (closes: #236481)
  * Swith to po-debconf format (closes: #232283)

 -- Pierre Machard <pmachard@debian.org>  Sat, 17 Jul 2004 19:10:45 +0200

lirc (0.6.6-9) unstable; urgency=low

  * QA Upload
  * Add depends on svgalib only for i386 to fix building on arch !i386

 -- Pierre Machard <pmachard@debian.org>  Sat, 17 Jul 2004 16:53:55 +0200

lirc (0.6.6-8) unstable; urgency=low

  * QA Upload
  * Set Maintainer to packages@qa.debian.org
  * Fix svgalib Build-Deps. (Closes: #243195)
  * GNU config automated update: config.sub (20031007 to 20040312),
    config.guess (20031007 to 20040312)

 -- Pierre Machard <pmachard@debian.org>  Sat, 17 Jul 2004 14:52:28 +0200

lirc (0.6.6-7) unstable; urgency=low

  * Set Architecture: properly for lirc-modules-KVERS packages. (Closes:#218881)
    courtesy of Helge Kreutzmann <kreutzm@itp.uni-hannover.de>
  * GNU config automated update: config.sub (20030717 to 20031007),
    config.guess (20030702 to 20031007)
  * Build-Depend on debhelper >= 4.0.18 for dh_install's --list-missing.
    (Closes:#187712)
  * Fix "quick walkthrough" instructions it is "debian/rules" not "make".
    (Closes:#202622)
  * Recommend xfonts-75dpi and copy from the gimp's package description the
    explanation on why it is only recommended. (Closes:#215168)
  * Use ACTISYS_ACT200L instead of ACTISYS_200L to match driver sources.
    (Closes:#204724)
  * Remove "Depends: ${shlibs:Depends}, ${misc:Depends}" from binary module
    packages as it may cause an empty Depends: line which then confuses apt.
    (Closes:#210477)
  * Fix spelling in hardware.conf. (Closes:#218887)
  * Add a comment about /dev/lirc/0 to hardware.conf. (Improves:#197306)
  * Make sure this changelog is UTF-8.

 -- Manuel Estrada Sainz <ranty@debian.org>  Sat, 22 Nov 2003 22:07:51 +0100

lirc (0.6.6-6) unstable; urgency=low

  * Changed liblircclient-dev section to libdevel.
  * Added "Source: lirc" to modules-source's debian/control. (Closes: #213819)
  * GNU config automated update: config.sub (20030103 to 20030717),
    config.guess (20030110 to 20030702)

 -- Manuel Estrada <root@ranty.pantax.net>  Thu,  2 Oct 2003 23:45:36 +0200

lirc (0.6.6-5) unstable; urgency=low

  * Use dpatch.
  * Use ACTISYS_200L instead of ACT200L to properly configure SIR kernel
    module. (closes: Bug#182647)

 -- Manuel Estrada Sainz <ranty@debian.org>  Sat,  8 Mar 2003 20:15:56 +0100

lirc (0.6.6-4) unstable; urgency=low

  * Add kdist_configure target to lirc-modules-source. (closes: Bug#169364)
  * GNU config automated update: config.sub (20020905 to 20021130),
    config.guess (20020903 to 20021130)
  * use DH_COMPAT 4
  * GNU config automated update: config.sub (20021130 to 20030103),
    config.guess (20021130 to 20030110)
  * Load kernel modules modules with autoclean (closes: Bug#176421)
  * Move configuration files for the different remotes from share/doc/lirc/ to
    share/lirc/.

 -- Manuel Estrada Sainz <ranty@debian.org>  Wed, 22 Jan 2003 21:20:32 +0100

lirc (0.6.6-3) unstable; urgency=low

  * Include logcheck support as suggested by Blars Blarson <blarson@blars.org>
    (closes: Bug#164510)
  * GNU config automated update: config.sub (20020703 to 20020905),
    config.guess (20020709 to 20020903)
  * 'sed' was segfaulting on 'configure', use 'sort -u' instead
    (closes: Bug#166264).

 -- Manuel Estrada Sainz <ranty@debian.org>  Fri, 25 Oct 2002 21:44:45 +0200

lirc (0.6.6-2) unstable; urgency=low

  * Fixed modutils file setup on postinst (closes: Bug#164200).
    Thanks to "Aaron M. Ucko" <ucko@debian.org> for diagnostic and fix.
  * Temporarly renamed 'rc' into 'irsend' to prevent name clash with 'rc'
    package, if upstream uses something different, I'll follow.
    (closes: Bug#164196).

 -- Manuel Estrada Sainz <ranty@debian.org>  Fri, 11 Oct 2002 11:16:50 +0200

lirc (0.6.6-1) unstable; urgency=low

  * New upstream release.
    * added rc tool for sending IR commands (previously included in xrc package)
    * bugfix for Winfast TV2000 card
    * added SIR support for Actisys Act200L dongle (Karl Bongers)
    * added UDP network driver for use with the IPC@Chip (Jim Paris)
    * added support for hardware connected to soundcard input (Pavel Machek)
    * added support for Tekram M230 Mach64 (Froenchenko Leonid)
  * add debhelper dependency to lirc-modules-source (closes: Bug#163974).
  * GNU config automated update: config.sub (20020621 to 20020703),
    config.guess (20020529 to 20020709)
  * Improved sanity checking when building kernel modules (closes: Bug#153491).
  * Fixed a typo that prevented "automatic" configuration of lirc_parallel
    driver.
  * Use /etc/modutils/lirc to set kernel module parameters (closes: Bug#154476).
  * Add a note about the need of 'setserial /dev/ttySX uart none' when using
    lirc_serial or lirc_sir to README.Debian.
  * lirc.config is now "POSIX Shell" compatible, use /bin/sh instead of
    /bin/bash.

 -- Manuel Estrada Sainz <ranty@debian.org>  Thu, 10 Oct 2002 18:53:57 +0200

lirc (0.6.5-6) unstable; urgency=low

  * Took the upstream fix for the compilation problem with 2.4.19-rc1 kernels.
    (closes: Bug#152982)

 -- Manuel Estrada Sainz <ranty@debian.org>  Thu,  8 Aug 2002 13:58:48 +0200

lirc (0.6.5-5) unstable; urgency=low

  * Patch by Andy Mortimer <andy.mortimer@zetnet.co.uk> to include network
    only support. (closes: Bug#151414)

 -- Manuel Estrada Sainz <ranty@debian.org>  Tue,  9 Jul 2002 17:03:47 +0200

lirc (0.6.5-4) unstable; urgency=low

  * Applied a patch from CVS to remove the restricted licence on files
    generated with irrecord. (closes: Bug#152074)

 -- Manuel Estrada Sainz <ranty@debian.org>  Sun,  7 Jul 2002 02:12:57 +0200

lirc (0.6.5-3) unstable; urgency=low

  * Hacked around a problem with kernel 2.4.19-rc1.

 -- Manuel Estrada Sainz <ranty@debian.org>  Thu,  4 Jul 2002 23:36:10 +0200

lirc (0.6.5-2) unstable; urgency=low

  * Fixed a typo in README.Debian
  * Tell how to get a list of supported drivers in /etc/lirc/hardware.conf
    (closes: Bug#141318).
  * Changed section to "utils". (closes: Bug#145100)
  * GNU config automated update: config.sub (20020102 to 20020307),
    config.guess (20020102 to 20020320)
  * GNU config automated update: config.sub (20020307 to 20020621),
    config.guess (20020320 to 20020529)

 -- Manuel Estrada <root@ranty.ddts.net>  Thu,  4 Jul 2002 21:50:25 +0200

lirc (0.6.5-1) unstable; urgency=low

  * New upstream release.
  * Updated debian/rules based on /usr/share/doc/autotools-dev/README.Debian.gz
        + Use DEB_HOST_GNU_TYPE and DEB_BUILD_GNU_TYPE
        + Update config.{sub,guess} automatically
        + touch every single file in 'clean' to prevent timestamp skews
  * GNU config automated update: config.sub (20011130 to 20020102),
    config.guess (20011126 to 20020102)
  * Use syslog and offer to remove /var/log/lircd (closes: Bug#131774)
  * Integrate it87 kernel driver with the packing.
        + updated debian/modules-source/{Makefile,README.make},
          lirc-modules-source.templates and lirc-modules-source.config

 -- Manuel Estrada Sainz <ranty@debian.org>  Fri,  1 Feb 2002 21:04:49 +0100

lirc (0.6.4-10) unstable; urgency=high

  * The urgency is because:
        + 0.6.4-9: may be uninstalable.
        + reduces user frustration on module building by giving a verbose
          error message.
        + Complies with policy by not restoring deleted conffiles on the users
          back.
        + Secures device permisions.
        + There is no new feature.
  * /etc/lirc/lircmd.conf may not be there (closes: Bug#126279).
  * Don't create /etc/lirc/* files unless they are there, they should be moved
    from /etc/ or the user chooses to reconfigure the package.
  * Add MODULE_LICENSE to kernel modules, patch by Ingo Saitz <ingo@debian.org>
    This was already fixed upstream, but oh well, lets not wait to the next
    release. (closes: Bug#128074)
  * Cry out if IRQ, PORT or TIMER are not set when compiling kernel modules.
    (closes: Bug#108131)
  * Tell devfsd to create /dev/lirc/0 unconditionaly. (works around: #128072)
    The proper fix should come soon from upstream.
  * Changed permisions of kernel devices from "root.video 660" to
    "root.root 660" since only lircd should use them and it runs as root.
        By writting to this devices you may confuse kernel code and that kind
        of thing should be reserved to root. If someone feels that read-only
        access should be allowed to to other users or groups go ahead and file
        a bug.

 -- Manuel Estrada Sainz <ranty@debian.org>  Sun, 13 Jan 2002 20:27:00 +0100

lirc (0.6.4-9) unstable; urgency=low

  * Added IntelliMouse support to lircmd. (closes: Bug#122300)
  * Fixed html comments on the documentation which prevented some text from
    showing up in a browser, so if you were looking for something and it
    wasn't there go back and make sure it is still not there.

 -- Manuel Estrada Sainz <ranty@debian.org>  Sat, 15 Dec 2001 20:04:48 +0100

lirc (0.6.4-8) unstable; urgency=low

  * Took X dependent parts and svgalib parts to their own packages, and have
    lirc Suggest them. (closes: Bug#121543)
  * ispelled README.Debian.
  * Applied patch to handle epochs properly on lirc-modules-source by
    Dwayne C. Litzenberger" <dlitz@dlitz.net> (closes: Bug#123019).
  * Enabled Irman support (closes: Bug#103951).
        I don't have an Irman and don't realy know how the hell it works, so
        if there is any problem please report and I will try to fix it.
  * Updated config.sub and config.guess from ftp://ftp.gnu.org/pub/gnu/config/

 -- Manuel Estrada Sainz <ranty@debian.org>  Mon, 10 Dec 2001 23:46:29 +0100

lirc (0.6.4-7) unstable; urgency=low

  * I forgot to protect a couple of db_input's with "|| true".
    (closes: Bug#121006)
  * Make sure lirc-modules-source/kernel-source-not-found gets shown when
    needed.

 -- Manuel Estrada Sainz <ranty@debian.org>  Sun, 25 Nov 2001 03:32:58 +0100

lirc (0.6.4-6) unstable; urgency=low

  * Build-dep on svgalib-dummyg1[!i386] and svgalibg1-dev [i386] so it can
    build on architectures where svgalib is not available.

 -- Manuel Estrada Sainz <ranty@debian.org>  Wed, 21 Nov 2001 13:17:22 +0100

lirc (0.6.4-5) unstable; urgency=low

  * call db_stop in lirc.postrm.
  * modified lirc-modules-source.postinst a bit hopefully to make it
    more portable, infact it now works with zsh.
  * Updated README.Debian on regards to irman2lirc.
  * Updated manpages and added manpages for all binaries (closes: Bug#85217).
  * Build smode2 which makes lirc depend on svgalibg1. Please file a wishlist
    bug suggesting an alternative if that is inconvenient.

 -- Manuel Estrada Sainz <ranty@debian.org>  Sun,  4 Nov 2001 20:39:50 +0100

lirc (0.6.4-4) unstable; urgency=low

  * lirc was not building on powerpc because of the time difference with
    voltaire.debian.org. I was 'touch'ing configure.in to prevent rebuilding
    too much stuff and the time difference broke that. Now I am a bit more
    aggressive with the time change.
  * Use forkpty from libc, so I don't have to worry about devfs or devpts.
    closes: #115870 or at least makes it a libc problem :)

 -- Manuel Estrada Sainz <ranty@debian.org>  Mon, 29 Oct 2001 15:40:23 +0100

lirc (0.6.4-3) unstable; urgency=low

  * Updated config.sub and config.guess from ftp://ftp.gnu.org/pub/gnu/config/
    so lirc may build on more architectures (closes: #115964).

 -- Manuel Estrada Sainz <ranty@debian.org>  Wed, 17 Oct 2001 16:19:56 +0200

lirc (0.6.4-2) unstable; urgency=low

  * Fixed problem with not existing configure.in.stamp (closes: #114494)
  * Put lirc-modules-source debs in $(KSRC)/.. as suggested by
    Christian Ohm <chr.ohm@gmx.net>
  * Depend on debconf (>= 0.5.00) to use seen flag.

 -- Manuel Estrada Sainz <ranty@debian.org>  Mon, 15 Oct 2001 19:29:53 +0200

lirc (0.6.4-1) unstable; urgency=low

  * Sorry for those 2 months of inactivity, I just came back from Colombia
    where I didn't have a SID system to work on.
  * New upstream release (closes: #112549)
  * Call update-devfsd on postrm when purging. (closes: #104446)
  * Change daemons/Makefile.in insted of daemons/Makefile.am to prevent
    creating of devices nodes. This way we don't have to run automake and we
    don't need to Build-depend on automake and libtool.
  * Properly use MOD_DIR on lirc-modules-source (closes: #105784).
  * Check for devfs device nodes after loading modules to make sure that they
    are there (closes: #114284)
  * Updated lirc-modules-source/do-build description, it should be more
    readable now (closes: #107765)
  * Added kdist_clean target to lirc-modules-source debian/rules.

 -- Manuel Estrada Sainz <ranty@debian.org>  Thu,  4 Oct 2001 14:35:33 +0200

lirc (0.6.3-3) unstable; urgency=low

  * include doc/irxevent.keys as it is referenced from within the
    documentation.
  * Mising variables will be restored in /etc/lirc/hardware.conf.
  * Installation won't fail if a conffile is missing (closes: #103326)
  * Maintainer script cleanups, removed bashisms but some shell script
    extracted from upstream needs bash :(
  * Don't manually call ldconfig on liblircclient0 postinst, debhelper does it
    already.
  * Make sure that debian/rules is executable on lirc-modules-source package.
    (closes: #103607)
  * Build lirc-modules-x.x.x.deb in MODDIR as set by make-kpkg and by default
    on ".." (closes: #103797)

 -- Manuel Estrada Sainz <ranty@debian.org>  Wed,  4 Jul 2001 13:10:14 +0200

lirc (0.6.3-2) unstable; urgency=low

  * Kernel module building cleanups: it now works for 2.2 kernels, but
    keep in mind that not all modules support all kernels.
  * Debconf German translation thanks to Sebastian Feltel <sebastian@feltel.de>
    (closes: #101171)
  * Parallel port kernel module now compiles on 2.4 kernels thanks to
    Santiago Garcia Mantinan <manty@debian.org>
  * Don't unpack the source into /usr/src/modules directly; instead,
    build a tarball in /usr/src/lirc-modules.tar.gz
  * lirc-modules-source is now a kernel-package compliant modules package.
  * Kernel modules configuration is automated with debconf.
  * lirc-modules-source:Recommends: make, dpkg-dev, c-compiler, kernel-package
  * lirc-modules-source:Suggests: kernel-source | kernel-headers
  * Extracted upstream configuration scripts and integrated them with debconf.
  * If there is not a valid configuration try to get it from the previous
    location or from upstream sample files. (closes: #102258)
  * Added support for devfsd.
  * Debconf Spanish translation thanks to
    Carlos Valdivia Yagüe <valyag@teleline.es> (closes: #102158)
  * init.d script tries to load appropriate kernel modules.
  * lirc-modules-source: Added descriptions of ANIMAX, IRDEO and TEKRAM.
  * Loading kernel modules from init.d script is now optional
       (See /etc/lirc/hardware.conf )
  * init.d script cryes out loud and refuses to launch daemons if it tries to
    load kernel modules and they are not there.
  * Resurrected automatic informal module building.
  * Register html documentation with doc-base.
  * Updated README.Debian, lirc-modules-source.README.Debian
    modules-source/README and modules-source/README.make to reflect latest
    changes.

 -- Manuel Estrada Sainz <ranty@debian.org>  Wed, 27 Jun 2001 05:43:29 +0200

lirc (0.6.3-1) unstable; urgency=low

  * New Maintainer.
  * New upstream release. (closes: #71643, #90129, #90130, #99405, #94686,
    #97373, #73023, #85214, #90258)
  * /etc/rc?.d/S??lirc priority is now 19 so it starts before gpm
    and creates /dev/lircm for devfs users. (closes: #76958)
  * Pass the kernel version correctly to configure. (closes: #85215)
  * Moved kernel modules source to it's own package.
  * lirc: Suggests lirc-modules-source
  * Adjusted de descriptions for the package.
  * moved irman2lirc to /usr/bin
  * Moved config files to /etc/lirc/ and added hardware.conf so editing
    /etc/init.d/lirc is not needed
  * Explained a bit more how to make all this work in README.Debian
  * Added some manpages.

 -- Manuel Estrada Sainz <ranty@debian.org>  Thu,  7 Jun 2001 00:45:11 +0200

lirc (0.6.1-1.2) unstable; urgency=low

  * Added libtool build-dependency. Should fix 90258
  * Non-maintainer upload

 -- Gopal Narayanan <gopal@debian.org>  Fri, 13 Apr 2001 17:09:21 +0000

lirc (0.6.1-1.1) unstable; urgency=low

  * Non-maintainer Upload
  * Took out the install-exec-local target from daemons/Makefile.am and
    added automake before configure in rules
  * mknod stuff commented out in init.d
  * Moved mknod to postinst
  * above fixes are for bug 85214

 -- Gopal Narayanan <gopal@debian.org>  Fri, 16 Mar 2001 23:02:39 -0500

lirc (0.6.1-1) unstable; urgency=low

  * New upstream version.
  * New makefile system for the kernel modules (Closes: #69028).

 -- Tom Lees <tom@debian.org>  Sun, 27 Aug 2000 12:30:57 +0100

lirc (0.6.0.final-2) unstable; urgency=low

  * Build the Makefile for /usr/src/lirc/lirc_aver.
  * Remove the /usr/src/lirc/Makefile* files, they're useless.
  * Add a README to /usr/src/lirc about building the drivers.

 -- Tom Lees <tom@debian.org>  Tue,  2 May 2000 09:33:14 +0100

lirc (0.6.0.final-1) unstable; urgency=low

  * New upstream release.
  * Fix a small bug which caused lircd to crash.
  * Make the drivers buildable.
  * Add AverMedia driver, thanks to Santiago Garcia Mantinan <manty@i.am>.
  * Remove the device nodes on purge.

 -- Tom Lees <tom@debian.org>  Thu, 20 Apr 2000 00:18:24 +0100

lirc (0.6.0pre6-1) unstable; urgency=low

  * Initial Release.

 -- Tom Lees <tom@debian.org>  Thu, 30 Mar 2000 19:30:57 +0100
